Reverse osmosis units for industry

Reverse osmosis units for industry

The reverse osmosis produces the demineralized water, according to the principle of reverse osmosis. This device ensures the removal of inorganic dissolved solids up to 98%, and 99% of the dissolved organics, colloids and particles.

Totally modular, they precisely meet the qualitative and quantitative requirements of applications such as chemical, pharmaceutical, food processing, electronics, surface treatment, boiler feed, etc ...

Some examples...

Industrial reverse osmosis system for 30 m3 / h

Industrial reverse osmosis system for 30 m3 / h
Industrial reverse osmosis system for 66 m3/h

Industrial reverse osmosis system for 66 m3/h

Industrial reverse osmosis system for 150 m3/h:

Industrial reverse osmosis system for 150 m3/h
Industrial reverse osmosis system for seawater

 

Industrial reverse osmosis system for seawater

 

A multi-chassis reverse osmosis system for seawater

A multi-chassis reverse osmosis system for seawater

Other versions

  • Reverse osmosis RO-400
    • L'appareil idéal pour les utilisations commerciales et les laboratoires consommant des quantités importantes d'eau osmosée
Reverse osmosis RO-400

The reverse osmosis RO-400 is an extremely compact and powerful system.

The will of the Bluewater company is to deliver this kind of device primarily for the purification of drinking water, where its capacity is insufficient.

ozone.ch philosophy is rather to propose this material for industrial applications.

 

  • Reverse osmosis OZ-RO1

Flow in the order of 1 to 2 liters / min. On request, the models are equipped with a permeate pump and a balloon for delivering water at a pressure of 6 bar and with a capacity of 25-75 liters.

Reverse osmosis OZ-RO2 "Merlin"

Flow rates in the order of 2L / min (120L / h). If the pressure is less than 3 bars, it's appropriate to add a booster pump. The Merlin is a compact autoportrant without pump and without control. It includes 2 membranes and an activated carbon filter.

  • Reverse osmosis DLK-RO3

Flow rates in the order of 250 to 500L / h. The installations are supplied rack or assembled on a wall. The systems are equipped with a circulation pump, a prior protection of filters, a solenoid valve, a pressure reducer, a flow meter for the concentrate and the permeate, an upstream protection and a switch conductivity measurement output. Membranes are 4 '' on one or two membrane holder tubes.

  • Reverse osmosis DLK-RO4

Flow rates > 1'000 L/h. The installations are supplied rack or assembled on a wall. The systems are equipped with a circulation pump, a prior protection of filters, a solenoid valve, a pressure reducer, a flow meter for the concentrate and the permeate, an upstream protection and a switch conductivity measurement output. Membranes are 8 '' on one or two membrane holder tubes. These systems are equipped with a recirculation and on request a flushing system.

Depending on the application ozone.ch provides and/or installs the complete processing chain:

  • Softener,
  • Reverse osmosis,
  • Storage vessel,
  • UV disinfection,
  • Resin output,
  • Conductivity,
  • Dispensing pump (booster).

Your advantages with ozone.ch

Company partner of DLK Technologies SA, we can offer you a wide range of reverse osmosis units

In addition, ozone.ch provides :

  • Turnkey delivered and installed systems;
  • Necessary staff training and technical assistance;
  • Laboratory analysis;
  • Service and maintenance contracts.
 

dlk_homeadress

ozone.ch Suisse
Chemin des Aulnes 1
CH-2400 Le Locle

Tél : +41 (0)32.841.77.55
Fax : +41 (0)32.841.77.57

info@ozone.ch

dlk_usine

ozone.ch France
1 rue de l'Hermitage
F-74100 Ambilly

Tél : +33 (0)4.81.91.62.13
Fax : +33 (0)4.81.91.62.14

info@ozone.ch

horaires d'ouverture:
lundi-vendredi
8.00 - 17.30 heures